Atlantis Land I-Fly Wireless Router ADSL Mode D'emploi page 29

For more detailed instructions on configuring and using the
I-Fly Wireless Router ADSL,
manual.
Before beginning the configuration of the Router you have to
know the parameters of your subscription ADSL.
There are five ways ─ PPPoE, PPPoA, RFC1483 routed, IPoA,
RFC1483 Bridge─ for the device to have a public IP address and
then to access Internet. You have to check with your ISP about
which way is adopted.
VPI/VCI: Consult the telephone company to get the Virtual Path
Identifier (VPI) and Virtual Channel Identifier (VCI) numbers.
The valid range for the VPI is 0 to 255 and for the VCI is 32 to
65535. The default value VPI is 0 and VCI is 32.
For BT (VPI=0, VCI=38)
NAT: The NAT feature allows multiple-user Internet access for
the cost of a single IP account. If you need to have a public server
or a public
Encapsulation Method: Be sure to use the encapsulation method
(LLC/SNAP
Gather the information as illustrated in the following table and
keep it for reference.
PPPoE
PPPoA
network,
or VC MUX)
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
Service Name
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
please refer to the online
and for KC (VPI=1, VCI=50).
NAT has
required
ENGLISH
to be disabled.
by your ISP.
29