Timed Cooking - Jenn-Air JMW3430DS Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Timed Cooking

WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Oven Timer and Delay Start allow the oven(s) to be set to turn on
at a certain time of day, cook for a set length of time, and/or shut
off automatically. Delay Start should not be used for food such as
breads and cakes because they may not bake properly.
To Set an Oven Timer:
The Oven Timer will turn the selected oven off when the set time
has expired. The maximum length is 11:59:00.
NOTE: In double-oven models, begin by selecting either Upper
Oven or Lower Oven from the control panel.
1. Select the desired cooking mode and oven temperature, and
then touch START.
2. Touch OVEN TIMER next to the displayed cooking mode
and temperature.
3. Set the desired length of time for the Oven Timer.
4. Touch START.
Touch one of the When Timer Ends keypads to set the
behavior of the oven after the Oven Timer has completed.
Choose between Hold Temp (default), Keep Warm, and Oven
Off. Touch START.
Keep Warm will reduce the oven temperature to 170°F
(77°C) after the cook time ends.
Hold Temp will keep the set oven temperature after the
cook time ends.
Oven Off will turn the oven off when the cook time ends.
When the Oven Timer has completed, the When Timer Ends
behavior will begin and a message of "TIMER ENDED AT
XX:XX" (the time of day) is displayed.
If enabled, end-of-cycle tones will sound, and then tones will
sound every minute.
5. At any time, touch CANCEL for the selected oven to cancel
the current cycle and return to the main menu, or open and
close the oven door to clear the display and/or stop reminder
tones.
To Cancel the Oven Timer only:
1. Touch the Oven Timer.
2. Touch OFF.
To Edit the Oven Timer:
1. Touch the Oven Timer.
2. Select the new desired length of time.
3. Touch SET.
OR
To Set a Delay Start Time and Stop Time:
Before setting, make sure the clock is set to the correct time
of day. For double ovens, be sure to select the desired oven
before proceeding.
NOTE: In double-oven models, begin by selecting either Upper
Oven or Lower Oven from the control panel.
1. Select the desired cooking mode and oven temperature.
Follow the on-screen prompts until the Delay keypad appears.
NOTE: Delay Start may be used with the Bread Proof function,
but the temperature is not adjustable.
2. Touch DELAY.
3. Set the desired "Cooking start at" time.
NOTE: The start and end times are rounded to the nearest
quarter hour (00:00, 00:15, 00:30, or 00:45).
4. Set the desired "Cooking ends at" time.
5. Touch SET.
Touch START NOW to immediately begin the cooking timer
without a delay.
The difference between the "Cooking start at" time and the
"Cooking ends at" time is used as the cooking timer.
When the start time is reached, the oven will automatically turn
on. The time countdown will appear on the oven display.
When the Oven Timer has completed, the When Timer
Ends behavior will begin and a message of "TIMER ENDED
AT XX:XX" (the time of day) is displayed.
If enabled, end-of-cycle tones will sound, and then reminder
tones will sound every minute.
6. Touch CANCEL for the selected oven to cancel the current
cycle and return to the main menu.
If the oven door is opened and closed after the cycle ends, the
display will be cleared and the reminded tones will stop, but
the oven will continue to operate in the end-of-cycle behavior
selected (Keep Warm is the default behavior).
NOTE: Changing the Oven Temperature or Oven Time after the
Start Time is reached will change the When Timer Ends behavior
to the Hold Temp function.
15
OR

Publicité

Chapitres

Table des Matières
loading

Table des Matières