Fellowes Galaxy e 500 Manuel D'instructions page 4

Masquer les pouces Voir aussi pour Galaxy e 500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
ENGLISH
STEPS TO BIND
1
1. Check the green power
neon is on.
5
5. Test punch scrap sheets to
check edge guide setting.
DOCUMENT BINDING
1
1. Ensure edge guide is set to
the proper document size. Punch
front and back covers first.
REMOVABLE BINDING PLATFORM
Galaxy has a unique mobile binding platform. The platform can be
lifted from the base and used on a stable surface to bind documents
using the normal binding procedure and also allows different users to
work together. When not in use, the platform should be stored safely
in the punch machine.
Satellite
SY ST EM
4
2
2. Select the correct comb
diameter using the storage tray.
6
6. Load punched sheets directly
onto the open comb.
2
Front
30
Cover
30
MAX 28
(80gsm)
Back
30
Cover
2. Punch sheets in small batches
that do not overload the
machine or the user.
Adjust edge guide, if necessary.
®
3
3. Select the correct back margin
depth for number of sheets.
7
7. Empty waste tray regularly
- ideally after each use.
3
3. Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
4
4. Insert the plastic comb into
the opening mechanism. Pull
comb-opening lever forward
to open the comb.
8
8. Switch off the machine.
4
4. When all punched sheets are
loaded onto the comb, push the
comb lever backwards to close
the comb and remove the bound
document.

Publicité

Table des Matières
loading

Table des Matières