Product Lifespan; Legal Obligations; Warranty - KONG Italy GRIZZLY Mode D'emploi

5 PRODUCT LIFESPAN

Read section 1C carefully. The lifespan of
metal equipment is theoretically unlimited,
while for textiles and plastics it is 10 years
from the date of manufacture provided that:
the maintenance and storage are carried
out as described in point 3, the pre-use and
post-use checks and periodic inspections do
not reveal operating defects, deformation,
wear, etc., the product must have been used

6 LEGAL OBLIGATIONS

Work, sport and professional activities are often
regulated by domestic legislation that may
impose limits and/or obligations to the use of
PPE and the preparation of security systems of
which PPE are components. It is a requirement

7 WARRANTY

The manufacturer guarantees that products
supplied conform to the agreed specifications.
The warranty for defects is limited to
manufacturing defects and raw materials:
it does not include normal wear and tear,
oxidation, damage caused by misuse and/or
use in competitions,
maintenance, transportation, care or storage,
etc.; the warranty is immediately void in
cases where equipment has been modified
or tampered with. The validity corresponds to
the legal guarantee of the country where the
8
correctly, without exceeding ¼ of the load
marked. Do not use outdated equipment, (e.g.
equipment with an expired lifespan, without
an up-to-date inspection card, which does not
comply with current regulations, is not suitable
or not compatible with current techniques,
etc.). Discard equipment which is outdated,
warped, worn, not functioning properly, etc. by
destroying them to prevent any future use.
of the user and/or instructors to know and apply
these laws that in certain cases could impose
different obligations than what is reported in
this information.
product is sold (to a maximum of 3 years)
from the date of sale, by the manufacturer.
After this date, no claim may be made against
the manufacturer. Any request for repair
or replacement under warranty must be
accompanied by proof of purchase. If a defect
from improper is recognised, the manufacturer will repair or,
at its own discretion, replace or refund the
product. In no event shall the responsibility of
the manufacturer extend beyond the invoiced
price of the product.