Technical Specifications; First Use And Charging Of The C-Pack Battery - therm-ic C-PACK 1300 Mode D'emploi

INSTRUCTIONS FOR USE / ENGLISH

TECHNICAL SPECIFICATIONS

USB wall plug Input:
universal charger* 100V-240V ~
(incl. contry-speci- (50-60 Hz),
fic adapters) max. 300 mA
USB charger cable Input:5V
Therm-ic** max. 2000 mA
C-Pack 1300 Output: 3.7 V / 2600 mAh
C-Pack 1700 Output: 3.7 V / 3400 mAh
* Optional accessory from Therm-ic
** available in retail locations or from Therm-ic
FIRST USE AND CHARGING OF THE C-Pack
BATTERY
Important note:
The C-Pack battery must be charged before using
them for the first time.
Preparing the USB power supply (optional). Slide your
country-specific adapter into the slot on the back of
the charger until it locks in with an audible click.
Output:
5V / 2000 mA
Output:
4.2V / 2000 mA
USB cable charging process :
1. Please ensure that the C-Pack is switch OFF while
charging.
2. Plug the USB cable into USB port. The charge
indicator (1.6) will light up green. Lift up metal
clip to access to the charging trap. Next, you plug
the charging connectors of the cable into the
batteries (1.5 - 1.7). The charging process will start
automatically and the charge indicator (1.6) will light
up in red during charging.
3. Once the C-Pack batteries are fully charged, the
charging process is automatically concluded and
the LED on the charge indicator (1.6) will switch
back to green.
4. Remove both C-Pack batteries from the charging
connectors.
Important note:
• Recharge the C-Pack battery after each use. This
extends the service life of the batteries and ensures
that the device is always ready for use.
• The battery consists of lithium ion cells and can be
charged in any state. For this reason, the battery
9