hestan AKMWCK Manuel D'installation page 6

INSTALLATION INSTRUCTIONS
C. Position DUCT (A)-2 on the top of the oven and
insert it into the hold lip of DUCT (A)-1. Secure
DUCT (A)-2 to DUCT (A)-1 using two SCREWS
EN
(I) provided. See Figure 4.
SCREW (I)
D. Position DUCT (A)-3 on top of the oven and
insert it into DUCT (A)-2. Secure DUCT (A)-3
using three SCREWS (I) provided. See Figure 5.
SCREW (I)
4
©2019 Hestan Commercial Corporation
DUCT (A)-1
Figure 4
SCREW (I)
DUCT (A)-3
DUCT (A)-2
Figure 5
(CONT.)
E. Carefully turn over exhaust assembly. Remove
adhesive backing from CUSHION L. The cushion
should be applied to the flanges of the duct
assembly as indicated by arrows. See Figure 6.
DUCT (A)-2
SCREW (I)
F. Remove SCREW from the upper right and left
corners at the rear of the oven. Place duct
assembly on the top of the unit as shown and
secure the duct assembly to the oven using the
two screws just removed from the oven. See
Figure 7.
SCREW (I)
SCREW
CUSHION (L)
Figure 6
SCREW
Figure 7