Step 1 : Preparations Before Installing Monitor; Step 2 : Option 1 : Clamp - LDLC ARM2 Guide D'utilisation

ARM2

3. Step 1 : Preparations before installing monitor

1. Make sure there are VESA holes 100x100mm or 75x75mm in the monitor. If not, the mount couldn't be installed.
2. Remove the original fixed base of monitor. Be careful not to scratch the screen.
4. Step 2-A : Clamp
5. Step 2-B : Grommet
Keep the counterbore
Desk
Tighten
side down
Drill or size of the hole
min-max diameter
Desk
8.5-70mm
U S E R ' S G U I D E
9
For table thickness:
20-120 mm.
Select right holes
according to the
thickness of desk.
For table thickness:
25-100 mm.
10
Tighten
EN
Desk