Lancellotti ENFASI Manuel D'utilisation page 86

Turn the knob all the way clockwise to wind the timer. It is possible to set the
required time up to a maximum of 60 min. The bell rings briefly when the
preset time has elapsed.
The induction hob is fitted with knobs for controlling the
power level.
To select a different power level, turn the control knob to
the required value (1 - 9 and P).
"P" is the maximum power applicable to each radiant
element.
Turn the knob to set the desired power value (see table in section " 7.3"). Turn the knob to display
the actual desired power level, whereas the one selected with the knob is only indicative.
All the controls for the radiant elements are located on the front panel and the relative displays are
visible on the hob.
86
Instructions for the user
DESCRIPTION OF TIMER KNOB
DESCRIPTION OF KNOBS
ON THE INDUCTION HOB
LAYOUT OF RADIANT ELEMENTS – Description of symbols
REAR LEFT
FRONT LEFT
CENTRAL
REAR RIGHT
FRONT RIGHT