Operating The Air Conditioner - Inventum AC127W Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4
operation of the air conditioner
1.
Key for oscillation [ swing /
]
2.
Timer key [ timer /
]
3.
Function key [ mode /
]
4.
Down key
5.
Up key
6.
Key for wind speed [ fan /
]
7.
Sleep mode [ sleep /
]
In addition to cooling, the air conditioner has two other functions, i.e. air circulation and dehumidification.
The air conditioner can be operated via the control panel on the appliance and with the provided remote control.
• Choose a location near a socket.
• Install the discharge hose in accordance with the figures and make sure the window is closed as much as possible.
• Insert the plug in an earthed socket.
• Press the on/off key
to switch on the air conditioner. The valve of the air outlet opens automatically.
• The temperature range of the air conditioner is: 16 to 30°C.
• Check that the discharge hose is mounted correctly.
• Do not share the socket with any other appliances.
COOLING
• Press the mode key [ mode /
] until the indicator light - cool - lights up. The set temperature is shown on the display.
• Press the [ up
and down
] key to set the required room temperature (between 16°C and 30°C).
• Press the [ fan /
] key to set the wind speed. There are four fan positions: automatic, low, medium and high.
The best temperature in the summer will be between 21 and 24°C. The speed of the fan can be sensed better on the air circulation position than on the cooling position.
DEHUMIDIFICATION
• Press the mode key [ mode /
] until the indicator light - de-humidify - lights up.
• The wind speed is on automatic and cannot be changed.
• Keep windows and doors closed for the best result. The air discharge hose does not have to discharge to the outside for this mode.
When using this position, a discharge hose (such as a garden hose, not included in the delivery) must be connected in order to discharge the condensation water.
• Unscrew the screw cap on the back of the appliance.
• Mount the end of a garden hose or a similar discharge hose to the drain and place the other end
in a receptacle situated lower than the drain of the appliance, so that the condensate water can
be discharged properly. Recommendation: hose connection is 5/8" and the hose is 3/4".
Caution:
• Condensation water may run out of the drain when the screw cap is removed and the appliance has
been used in cooling mode. Keep a drip tray at hand when removing the screw cap, in order to collect
the condensation water.
• Make sure the discharge hose for the condensation water properly descends and is not higher than
the drain of the appliance.
• When using the cooling position, it is recommended to not discharge the condensation water continuously,
but to close the screw cap again. In this way the appliance is able to provide its best performance.
AIR CIRCULATION
When using this position, the air discharge hose does not have to be connected.
• Press the mode key [ mode /
] until the indicator light - air circulation - lights up.
• Press the [ fan /
] key to set the wind speed - low, medium or high. The accompanying indicator light will light up.
AUTOMATIC POSITION
When using the automatic position [ auto ], the appliance automatically selects whether it should cool or circulate air. This depends on the set temperature and the room temperature.
• Press the mode key [ mode /
] until the indicator light - auto - lights up.
• Press the [
and
] keys to set the required temperature (between 16°C and 30°C). 23°C for example. When the room temperature is below 23°C, the appliance starts to circulate
the air, and above 23°C the appliance starts to cool.
• It is not possible to adjust the wind speed in this mode.
SWING MODE
By means of the swing mode you can determine the up and down movements of the fins and therefore the air flow.
• Switch on the appliance at the required position (cooling, air circulation or dehumidification).
• Press the swing key
and the fins stop moving in different positions or the fins move continuously.
• Do not change the positions of the fins manually.
26
English
14
13
on off
auto cool dry fan
swing
timer
mode
1
2
3
4
12
11
10
auto low med high
sleep filter
fan
sleep
reset filter (3s)
5
6
7
8.
on/off key [ power /
]
9.
Warning light - clean filter
10. Indicator light - sleep mode
11.
Indicator light - ventilation speed: auto / low / medium / high
12. Display
13. Indicator lights - auto / cool / de-humidify / air circulation
14. Indicator lights - timer on / off
screw cap
9
power
8
outlet
discharge hose

Publicité

Table des Matières
loading

Table des Matières