Remington Dry and Style AS800 Mode D'emploi page 4

Masquer les pouces Voir aussi pour Dry and Style AS800:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
ENGLISH
During use, always ensure the inlet and outlet grilles are not blocked in any way as this
will cause the unit to automatically stop. If this should occur, switch off and allow the
unit to cool.
Keep the power plug and cord away from heated surfaces.
Do not leave the appliance unattended while plugged in.
Do not place the appliance on any soft furnishings.
Do not use attachments other than those we supply.
Do not set the appliance down while still on.
Do not twist or kink the cable, or wrap it round the appliance.
Do not use the appliance if it is damaged or malfunctions.
Check the cord regularly for any sign damage.
This appliance is not intended for commercial or salon use.
PARTS
1. 800 Watt power handle
2. 38mm thermal mixed bristle brush
3. 21mm thermal bristle brush
4. Concentrator
INSTRUCTIONS FOR USE
Wash and condition your hair as normal.
Squeeze out excess moisture with a towel and comb through.
Hair sprays contain flammable material – do not use while using the styler.
Select your attachment before you turn on the appliance.
1. Plug in the styler.
2. Attachments can be connected to the power handle by simply aligning the attachments
to the handle and clicking into place.
3. To dry hair, use the concentrator attachment.
4. Dry roots completely and dry length 90% dry, ready for styling.
5. Section the hair prior to styling. Style the lower layers first.
6. For smaller and medium curls use the 21mm thermal bristle brush. Best for use on short
and medium length or layered hair.
7. Create soft spirals using the 21mm bristle brush
8. For looser curls and waves or to create volume and fullness use the 38mm mixed bristle
curling brush.
9. Select desired temperature and speed setting using the switch on the handle.
10. Let the attachments cool before removing.
11. To remove attachments, press the attachment release button and pull attachment away
from main housing.
12. After use, turn the appliance off and unplug.
13. Let the appliance cool before cleaning and storing away.
4
5. On/Off switch
6. Speed/heat setting switch
7. Attachment release button
8. Swivel cord/ Hang up loop

Publicité

Table des Matières
loading

Table des Matières