Connection (Azai6Wscdkb) - Airzone AZAI6WSCDKA Mode D'emploi

Connection (AZAI6WSCDKB)

The DKN Residential Cloud Wi-Fi Adaptor for Ductless units has one wiring cable. Follow these steps to connect it:
1. Disconnect the indoor unit power.
Connect the supplied cable to S21 connector on the indoor unit or an accessory adapter (ordered separately).
2.
3. Power the indoor unit. Check the LEDs (see LED Operation section).
T h e LED of the DKN Residential Cloud Wi-Fi Adaptor for Ductless stays blinking in green when the connection is correct.
Note: To facilitate the access to the DKN Residential Cloud Wi-Fi Adaptor for Ductless units, place it in an accessible location.
S21
19