Ecor Pro LD800 Manuel D'instructions page 9

CLEANING
Disconnect from the mains before cleaning or servicing the unit or any of its components.
Housing (all metal housing)
Wipe regularly clean with a moist cloth (a soft, damp cloth) and a mild household
detergent, Never use aggressive chemicals, petrol, aggressive detergents or other
cleansing solutions.
Air filter (HEPA type)
Remove for periodic replacement, helping to reduce the need to dust and helping
against bacteria, helping to prevent allergies.
Air circulation is impeded and the efficiency of the dehumidifying and air purifying
functions decreases when the filter is dirty. It is therefore good practice to replace the
filter at regular intervals. The precise intervals depend on the room in which the appli-
ance operates and on how frequently it is used. Replace the filter at least once a year.
If you do not replace the filter in time, the unit gets dirty inside and the dirt may cause
damage.
Caution
This unit should not be operated without the air filter fitted.
Operation without the air filter may damage the heat exchangers
SERVICING
Have your unit once a year serviced by a qualified engineer.
How to place a new filter :
A. B.
A. Remove the magnetic seal (filter access door) on one of the
two sides.
B. Remove the small metal plate by loosening the screw.
C. Slide the filter out of the unit.
Place the new filter (C).
Replace the small metal plate (B) with the screw.
Replace the magnetic seal (A) carefully to cover the door.
C.
9