Ecor Pro LD800 Manuel D'instructions page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION
Suitable for all indoor areas whether in the home, retail outlets, offices or other
Your unit can be installed in any area. Fresh, clean,
dry air can be ducted as needed.
Damp air can be extracted where needed.
Can cope with a whole home if placed in a loft,
basement or cupboard if ducted correctly.
Can even manage the air of a swimming pool
environment (special coating permits).
Fresh air Intake (ø 5.98") – Can take air from the
A
loft space (which often has heat from the home
and solar gain from roof tile sunlight absorption)
or alternatively, can be ducted to the outside
through the roof (with suitable connection) or to
the roof eaves to draw fresh air from outside.
Fresh air regulator – Simple slider setting to
allow the right amount of fresh air into the home
set by user.
Inlet moist air (ø 10") – Can have single or
multiple inlets by using Y or T connectors to the
B
inlet pipe connected to other rooms to draw air
from typically the bedrooms into the unit.
Rear outlet. (ø 10") – Often ducted to
central location in the home such as landing.
C
2nd outlet (optional) – Easy to fit additional duct
to the living area (on top of the unit).
Side humidity – Drainage tub connection point.
Excess water can be drained to the eaves, or
suitable drain. If gravity drain not possible an
additional pump should be fitted.
Controller (optional) – A controller is used to
sense the conditions in the home. When the
humidity gets beyond the user defined level
the LD800 will automatically start working.
More complex Controllers can be fitted to react
to temperature and CO2.
Changeable filter – Filters the air before heat
is extracted and circulated back into the home,
helping allergy sufferer.
8
LD800 stand alone
A
B
00
LD8
included in a ducted system
A
B
C
Top view
00
LD8
can be incorporated in a
central air system
C

Publicité

Table des Matières
loading

Table des Matières