Trigger Safety Latch - Campbell Hausfeld PW2802 Instructions D'utilisation

Pressure Washer
Pre-Operation (Continued)
Figure 6 – Connect high pressure hose to pump
6. Connect the high pressure hose to the pump outlet (See Figures
2 and 6).
7. Attach the lance to the gun (see Figure 7).
Figure 7– Attach lance to gun
8. Install quick connect tip by pulling back on collar and pressing
in tip. Release collar, make sure it completely returns to its
forward position and tip is secure (see Figure 8).
Pull collar back
Figure 8 - Installing Quick Connect Tip
www.chpower.com
9. Install quick connect tips to tip holder and secure to the
pressure washer handle. See Figure 9.
Figure 9 - Insert spray tips into the rubber tip holder

TRIGGER SAFETY LATCH

In the engaged position, the trigger safety latch prevents the
gun from being triggered accidentally. Push the latch fully up to
engage it (See Figure 10).
Always engage the trigger safety latch when the unit is not in
use.
Engaged
Figure 10a - Trigger locked
6
Disengaged
Figure 10b - Trigger unlocked