Menu 01 - Meter Order; Menu 02 Talkback Latch Enable; Menu 03 - Tft Brigtness - CB ELECTRONICS TMC-1 Manuel De Référence

Menu 01 – Meter Order
L Lx C Rx R Ls Rs
LFE
Although the Physical layout of the channels is fixed by the hardware the meter layout can
be changed to suit the user.
L R C LFE Ls Rs Lb
Rb
L C R LFE Ls Rs lb Rb This layout is good for 5.1 and 7.1 and the surrounds in stereo pairs
L C R Ls Rs lb Rb LFE Alternative to previous with LFE at end
L Lx C Rx R Ls Rs
LFE
TMC-1-Penta and TMC-1-AMon have a Stereo display option as follows
L R L-SLS-R L-H/P-R
Menu 02 – Talkback Latch Enable
T/B & L/B
T/B & L/B: The Internal and External talkback keys will latch with short depressions and no
latch with long depressions
L/B Only: Latching enabled on Listen back only.
Off: Latching is disabled on both Talkback and Listen back
Menu 03 – TFT Brigtness
0 1
TFT Brightness can be adjusted to suit ambient light levels.
Current version:
0= Full brightness, improved brightness control with no interference to the talkback
Early version
7= full brightness, there is some interference from the TFT Backlight to the talkback when
not set to Max.
2018 CB Electronics
TMC-1 Manuel de référence
Menu 01 – Meter Order
L C R LFE LS Rs Lb
Rb
This follows a standard stereo pair layout
This matches the physical layout of the channels in XMon
Displays Main Stereo mix, SLS and H/P cue mix

Menu 02 Talkback Latch Enable

Menu 03 – TFT Bright
2 3
46
L C R Ls Rs Lb Rb
LFE
L/B Only
4
L R C LFE Ls Rs Lb
Rb
Off
5 6
Version 7
7