Cleaning And Care - NUK Easy Control 200 Notice D'emploi

Babyphon Easy Control 200_ 02-2014 A6 Seite 25 Montag, 24. November 2014 10:46 10
Note:
• Where the batteries are new and fully
charged, the parent unit 7 can be
disconnected from the mains adapter and
operated on a portable basis for up to 6
hours.
• The charging indicator 2 flashes quickly
(approx. every second) when the batteries
are almost empty.
• There is no warning when the batteries are
completely empty. You should therefore
regularly check the connection.
• If you and the parent unit 7 move too far
from the baby unit 13, a warning will
appear:
– The range indicator 3 will begin to flash.
The parent unit 7 will try to re-establish
its connection with the baby unit 13.
– If it is unable to establish a new
connection within
parent unit 7 will emit a warning in the
form of double beeps. You should then
move closer to the baby unit 13.
7.1 Cleaning
Caution!
abrasive, corrosive or scratching cleaning
agents, as these could damage the device.
1. If necessary, wipe the individual parts with
a damp cloth.
2. Only use the baby monitor again when all
the parts have fully dried out.
20 seconds, the
25

7. Cleaning and care

Warning! To avoid the risk of electric
shocks, injuries and damage:
– Always disconnect
adapter from the power socket
before cleaning the device.
– Never immerse the individual parts
in water.
Under no circumstances
the mains
use