Connecting Lead Wires; Preparing For Session; Treatment Session - TensCare perfect Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Caution NEVER attempt to
recharge an alkaline battery.
Risk of explosion.
Caution Do not mix old, new or
different types of batteries as
this
may
lead
leakage or low battery indication.
Disposal: Always dispose of batteries
and device responsibly according to
local government guidelines. Do not
throw batteries onto a fire. Risk of
explosion.
11.2. CONNECTING LEAD
WIRES
Insert the lead wire plug into the base of
the unit.
Attaching the electrode pads to the
lead wire.
Push the pin ends firmly into the pigtail
ends of the electrode pads.
The lead wires may be damaged by
rough handling, and should be treated
with care.
Lead wire colour coding.
The ends of the lead wires are coloured
white or red. This coding is provided for
some professional uses. For most
purposes, the orientation makes no
difference, and you can ignore this
colour coding.
11.3. PREPARING FOR
to
battery
1) Before use make sure your skin is
clean and dry.
2) Place the electrode pads on the skin,
see section 8.
3) You can use your TENS for several
hours, you can attach the unit to your
belt using the belt clip or hang it around
your neck using a neck cord (not
included). For safety, use thread or
wool that will snap easily if the unit
snags on something.
4) You can safely lean on the electrode
pads. The sensation might change.
the skin.

11.4. TREATMENT SESSION

1) Press and hold the ON button on the
control unit for 3 to 5 seconds to switch
the control unit on.
When switched on for the first time, the
perfect TENS will automatically select
the programme A. Next time, it will
automatically select the programme
you were using the last time it was
switched off.
2) You can select from the 8 preset
programmes
programme. Details in section 7 will
help you identify the best programme to
suit you.
3)
selected, you can adjust the intensity of
19
SESSION
Warning: Ensure the perfect
TENS is switched OFF before
applying the electrode pads on
or
the
With
the
required
manual
programme

Publicité

Table des Matières
loading

Table des Matières