Backlight - WRD WESTERN WRM20+ Manuel De L'utilisateur

Configuration with WRD + WBM + WRMxx
List displayed:
WRD SETUP:
Oper.Mode: MONITOR

Backlight:

auto OFF
RESET: RUN
UPDATE FW: RUN
|
|
|
|
|
|
|
Tech. Menu Psw:
NOTES:
1
- not present in WRD + WBM Configuration;
2
- not present in WRD + WRMxx Configuration;
3
- the light bulb icon appears in the WRD + WRMxx Configuration;
4
- in WRD + Leonardo OFF-GRID Configuration;
Manuale utente
(1..8)
Value: Settable value and descriptions:
MONITOR; CONTROLLER : Operating Mode: Monitor/Controller
auto OFF; always ON : Backlight LCD: Auto power-OFF/
always ON
RUN : Reset the WRD device.
RUN : *CAUTION* starts the procedure to update the
firmware in the WRD device. The firmware update
file must be present in the uSD card. To start
the procedure press both ↑ and ↓ keys.
00
<0..FF> password to access the Technical Menu.
*CAUTION* Technical Menu is reserved for factory
checks.
WRD
23
EN
MENU 8.4