Electrical Features; Mechanical Dimensions - WRD WESTERN WRM20+ Manuel De L'utilisateur

Keys mode
---
DOWN
NAVIGATION MODE
ESC
GO INTO SETUP
ESC EDIT
DEC
> EDIT MODE <

4. ELECTRICAL FEATURES

DESCRIPTION
Nominal battery voltage
Supply voltage range
Self consumption
Operating temperature
Max cable section terminal (Power and RS485)
Weight
Dimension LWH
Degree of protection

5. MECHANICAL DIMENSIONS

Manuale utente
---
UP
EDIT
SELECT
INC
OK
SAVE
Pic.3 - Edit menu
PAR.
Vbatt
Pq
Tamb
Tab.1 - Electrical features
Pic.4 - Mechanical dimensions
WRD
It is possible to enter the EDIT mode (Pic.3), where it
is allowed, to modify the parameters by keeping
pressed the
EDIT mode is visible on the display by the presence of
the cursors on the modifiable parameter. For editing
are used the
SELECT button to change the value. For save the
changes the button
for 1 sec. To exit the EDIT mode, without saving the
changes, use the
items that require an action, press the
for 1 sec.
VALUE
12 / 24 / 48 autodetect
10 ÷ 64
1.0
-10 ÷ +40
1.5
250
160 x 95 x 27
IP20
6
EDIT button for 1 sec. Entry into the
/ INC/DEC buttons, press the
SAVE must be kept pressed
ESC button. To confirm the
EN
OK button
U.M.
(V)
(V)
(W)
(°C)
2
(mm )
(g)
(mm)