Possible Configuration; System Setup; Date Time Setup; Data Logger Setup - WRD WESTERN WRM20+ Manuel De L'utilisateur

• At the menu: 7.0 SYSTEM you make system settings. The correct profile must be selected, corresponding
to the battery features (an incorrect choice could lead over time to damage the battery itself).
5) Check the entire functioning by scrolling the screens.

2.2. Possible Configuration

The WESTERN WRD SYSTEM can work with different combinations of devices.
n. Configurations
1 WRD + WBM
2 WRD + WRMxx
(1..8)
3 WRD + WBM + WRMxx
WRD + Leonardo Off-Grid
4
Depending on the current hardware, the configuration must be set on the WRD. This operation is performed on
the menu: 8.0 WBUS CONFIG. where the addresses of the devices connected to the device must be specified
WBUS to facilitate the operation an auto configuration command is available that detects the connected
hardware.
Depending on the configuration set, the WRD displays the information and can execute its algorithms using the
available resources. The screens for each configuration are described below.

2.3. System Setup

In the menu: 7.0 SYSTEM the system settings are executed, the list of parameters changes according to the
current configuration. Detailed explanations are described in the chapter Configurations.

2.4. Date Time Setup

In the menu: 7.1 DATE / TIME you set the system clock and the time zone (Timezone). It is important to correctly
set this last parameter with the Timezone of the place where the system is located, so that the remote clock can
be updated correctly.

2.5. Data Logger Setup

In the menu: 7.2 DATA LOGGER you can enable the data logger by setting the minutes for the sampling
parameters: 10min. is the default value (enabled). It is also possible to request information regarding the μSD.

2.6. Network Setup

In the menu: 7.3 NETWORK you make the settings of the various network parameters. The DHCP function is set
by default, which automatically retrieves the necessary values. The connection to the remote server can be
enabled or disabled by the user.
Manuale utente
Monitoring
battery
PV production
(1..8)
battery, PV production, consumption
WRD
4
EN
Diagrams in Appendix
A1
A2, A3
A4, A5
A6, A7