Declaration Of Conformity - Elma 80.22.0 Manuel

8. Clean the blade again, and remove any metal debris that may have come from
the machine during the process.
9 Keep the sharpening stones clean to ensure they work properly.
10. Wear safety goggles to carry out this operation. You will avoid possible damage
to your eyes due to flying particles while sharpening.
ATTENTION
During the sharpening process incandescent metallic particles will be given off.
Protect your hands and keep the machine away from inflammable products while
sharpening.

07. DECLARATION OF CONFORMITY

UDOM S.A. declares that the product with reference 80.22.0 and description "Pro-
fessional meat slicer" complies with the following CE mark requirements:
EN 55014-12006, EN 55014-2:1997+A1:2001, EN 61000-3-2:2006, EN 61000-3-
3:2006
EN ISO 12100-1:2003, EN ISO 12100-2:2003, EN ISO 14121-1:2007, EN
ISO 14121-2:2007, EN 1672-2:2005, EN1674:1998, IEC 60335-2-
64:2002+A1:2007
18