Programming The Guest Mode; Taking Weight Measurement Only; Changing The Weight Mode - Tanita BC-601F Mode D'emploi

EN

PROGRAMMING THE GUEST MODE

Guest mode allows you to program the unit for a one-time use without resetting a
Personal key.
Press "GUEST/ ", the unit will beep and the display will show "0.0"
indicating it is ready to measure.
Now pull out the hand-electrodes, hold with arms straight down and
step onto the platform.
After the measurement, the unit will be ready to input your personal information
(Age, Gender, Height and Activity Level).
Your readings will be displayed once you complete entering your personal
information.
Note:
• The unit will automatically shut off after 40 seconds of displaying result with
inactivity.
• For children (age 7-17), the unit will only display the Weight, BMI
and the Body fat % (it will not display the Healthy Range Indicator).

TAKING WEIGHT MEASUREMENT ONLY

Select Weight-Only Key
Using your toe, tap the Weight-only key. After 2 or 3 seconds, "0.0" will appear on
the display and the unit will beep. When "0.0" appears on the display, step onto the
platform.
The body weight value will appear. If you remain on the platform, the weight result
will be displayed for about 20 seconds, and then the power will automatically
turn off. If you step off the platform, the weight will continue to show for about 20
seconds then the unit will shut off automatically.

CHANGING THE WEIGHT MODE

You can change the weight unit indicator by using the switch on the back of the hand-electrodes (kg/lb/st lb).
Note: For use only with models containing the weight
mode switch.
10