Celestron MICROSpin 44114 Manuel D'instructions page 6

3. USING THE DIGITAL CAPTURE SOFTWARE
MAIN WINDOW ICONS
SYSTEM SETTINGS MENU
The first time the MicroSpin Digital Capture software is started, the default settings will be loaded, and you may change these settings
manually in the system settings menu.
Device -
Choose your video streaming device (in this case the MicroSpin Digital Microscope).
Resolution - Change the capture resolution settings here.
Timed shot setup -
Movie setup -
Choose your video resolution here (640x480 or 320x240).
Save setting - Choose the destination folder on your computer where all images and video will be saved.
Language setting -
Advanced settings -
NOTE:
These settings available may vary depending on your operating system.
Saved files - With the MicroSpin Digital Capture software open, you can locate the saved files folder by clicking the "More... " button
located on the left of the main window.
Full screen
- To activate full screen mode, click the full screen button located in the bottom right hand comer of the MicroSpin Digital
Capture software window.
- To exit full screen mode, either double click on the screen, or press the "Esc" button on the keyboard.
6
I ENGLISH
Settings icon
Shutter trigger
Timer
Setup automatic image capture here.
The language of the MicroSpin Digital Capture software can be changed using this setting.
Clicking the "More..." button on the right of the system settings menu will allow you to manually adjust all of
the image settings.
These may include:
- Brightness
- Contrast
- Hue
- Saturation
- Sharpness
Video Record/Stop
Information
Power off
- Gamma
- White Balance
- Backlight comp
- Gain