Fagor VFA-70 S Guide D'utilisation Et D'entretien page 12

OPERATING
Hotplate blocking function
Blocking of the hotplates prevents accidental changes while they are operating. The
initial selections are maintained and the indicators remain active. The hotplates should
be blocked to prevent children from operating them or to prevent the effects of
accidental contact with cookware or utensils.
Press the blocking sensor until its pilot light comes on.
Unblocking
Touch the blocking sensor until its indicator pilot light switches off.
Double hotplate
The cooktops sources that have double heat source when touching the corresponding
sensors to said heat source only work with their small circuit . To operate the outer
part, touch the double hotplate sensor until its indicator pilot light comes on, switch off
by touching the sensor until the pilot light switches off.
Focus hotplate
The cooktops, which have the source of the heat source when acting over the
corresponding sensors of each heat source, only work with their circular circuit. To
switch on the outer part as well, touch the source hotplate sensor 0 until its control
point switches on.
To switch off the focus hotplate, touch the focus hotplate sensor 0 until the control
point switches off.
Multi-ring Hotplate
The hobs, which have a multi-ring heat source, on touching the corresponding sensors
to said heat source, only work with little resistance. If you wish the center ring to come
on as well, touch the double ring sensor so that the sensor's control point lights
up. To use the ring to heat a multi-ring pan, touch the sensor .
To switch off the two functions just touch the corresponding sensors again
and .
12