Troubleshooting - Zephyr PRB24C01BPG Guide D'utilisation, D'entretien Et D'installation

Troubleshooting

POSSIBLE
PROBLEM
The
appliance
does not
operate.
The
appliance is
not cold
enough.
Turns on and
off
frequently.
POSSIBLE CAUSE
⚫
Not plugged in.
⚫
The appliance is turned off.
⚫
The circuit breaker tripped
or a blown fuse.
⚫
Sabbath mode may be
enabled.
⚫
Check the temperature
control setting.
⚫
External environment may
require a higher setting.
⚫
Demonstration mode may
be enabled.
⚫
The door is opened too
frequently or for long
periods of time.
⚫
The door gasket does not
seal properly.
⚫
The cooler does not have
sufficient ventilation.
⚫
The cooler has restricted
air flow due to too much
storage.
⚫
The room temperature is
hotter than normal.
⚫
The door gasket is not
sealing properly.
⚫
The door is open too often.
⚫
The cooler does not have
the suggested ventilation.
⚫
The door is not closed
completely.
⚫
Ensure the appliance is
plugged in and the power
outlet has power.
⚫
Turn on the appliance.
⚫
Replace the broken fuse or
reset the breaker.
⚫
See Operation page and verify
Sabbath mode is disabled.
⚫
Adjust the set temperature.
⚫
Keep the appliance away from
sunshine or other heat sources
.
⚫
See Operation page and verify
Demonstration mode is
disabled.
⚫
Close the door tightly and do
not open the door too
frequently or for a long period
of time.
⚫
Ensure the door gasket is not
loose.
⚫
Read and follow the
"installation clearance
requirements" section.
⚫
Open space in the cabinet to
allow air flow.
⚫
Run the refrigerator at the
appropriate ambient
temperature.
⚫
Make sure the door gasket is
properly sealed.
⚫
Minimize the number of times
the door is opened.
⚫
Read and follow the
'installation clearance
requirements" section.
⚫
Make sure the door is
completely closed.
25
SOLUTIONS