Cleaning And Maintenance; Product Registration - WAGNER MICRO HEAT TOOL Guide D'utilisation

SHRINK WRAPPING
Wrap the object with heat-shrinkable plastic film. Begin to heat the film from a safe distance
while keeping the hot tool moving. Move the hot tool closer to the film until the film starts to
shrink and tightens around the object.

CLEANING AND MAINTENANCE

Make sure the heat tool is turned OFF (0), the power cord is unplugged, and the heat
tool has sufficiently cooled before cleaning.
Keep the intake openings on the housing clean and free of obstructions. Us a soft, dry brush to
clean the openings periodically. Use only mild soap and a damp cloth to clean the heat gun.
Many household cleaners contain chemicals which could seriously damage the housing.
Do not use gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or similar products
when cleaning the heat gun. Never allow any liquid to get inside the tool or immerse any part of
the tool into a liquid.

PRODUCT REGISTRATION

Register your product online at www.wagnerspraytech.com.
DATE CODE LOCATION
QUESTIONS?
Call Wagner Technical Service at:
1-800-727-4023
Register your product online at:
www.wagnerspraytech.com
11
EN