Operating Your Humidifier - Honeywell HCM-710 Serie Mode D'emploi

SETTING UP YOUR HUMIDIFIER (continued)
Filling
Fill pitcher or jug with
up to 1 gallon of cool
water.
Note: You can fill this
humidifier with as
much as 1 gallon of
water or less.

OPERATING YOUR HUMIDIFIER

On/Off
With the power switch in the OFF
position, plug the filled humidifier
into a polarized 120V outlet. DO NOT
FORCE THE POLARIZED PLUG INTO
THE OUTLET; It will only fit one way.
DO NOT plug in humidifier with wet
hands to avoid electric shock.
4
Pour water into the fill
funnel area located on
the top of the unit.
DO NOT pour more
than 1 gallon into your
humidifier. Overfilling
your humidifier will
result in water being
released from the
overfill hole located
above the water
window.
Moisture Output Controls
Set your output control to:
High: Maximum Moisture
for Larger Rooms
Low: Moisture Maintenance
or Sound Sleep
An Indication that your
humidifier needs to be
refilled is the water level
is not visible in the
water window or is
below the refill line.