Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
•
Do not allow any part of the appliance touch the face, neck or scalp.
•
Keep the power plug and cord away from heated surfaces.
•
Do not use attachments other than those we supply.
•
Do not use the appliance if it is damaged or malfunctions.
•
Do not twist or kink the cable, or wrap it round the appliance. Check the cord regularly for any sign
damage.
•
This appliance is not intended for commercial or salon use.
PARTS
1.
Ceramic coated barrel
2.
Water reservoir
3.
Water level window
4.
Bristle lock guard
5.
Heat resistant bristles
ADDITIONAL FEATURES
•
Fast heat up—ready to use in 60 seconds.
•
Multivoltage: for home or abroad. At 120V times and temperatures may vary.
INSTRUCTIONS FOR USE
•
Before use, ensure the hair is clean, dry and tangle-free.
•
For extra protection use a heat protection spray.
•
Hairsprays contain flammable material – do not use while using this product.
1.
This appliance can be used without steam; when steam is required fill the water reservoir first.
2.
Hold the unit in a vertical position with cap end down to prevent any spillage from any residual water
left in the cap.
3.
Unscrew the reservoir and fill with warm or cool water to the fill line. Replacethe cap with the tong still
held vertically with cap end down and twist gently into place.
4.
The water level in the reservoir can be seen through the water level window.
5.
Section the hair prior to styling. Style the lower layers first.
6.
Plug the unit into the mains and wait for it to heat up.
7.
To activate steam, gently depress the cap. The unit is designed to release with one push, just the right
amount of steam required for a small section of hair.
8.
Take a section of hair and place the ends around the brush. Rotate the styler allowing the hair to wrap
around the barrel of the brush.
9.
Press the reservoir cap to release the steam.
10. Wait about 10 seconds for curl to form.
11. Press the curl release button and carefully draw the unit away allowing hair to unwind automatically.
12. Allow the hair to cool before styling.
13. When finished unplug the appliance and allow to cool before cleaning and storing away.
Changing the Bristles
•
To change the bristles, the unit must be unplugged and cool. Remove the reservoir and unscrew the
bristle lock guard and slide the bristles off the barrel.
•
Taking the other set of bristles, gently slide each row into a groove on the barrel and push into place.
Screw the lock guard securely back into place and replace the reservoir.
4
6.
On indicator light
7.
Curl release button
8.
Stand
9.
Swivel cord
Publicité
Table des Matières
