Preparation Of The Installation Area; Safety Precautions - ChefLine TN 38-45 Notice D'utilisation

4 PREPARATION OF THE INSTALLATION
AREA
4.1

SAFETY PRECAUTIONS

Responsibility for operations executed in the location where the
machine is installed is, and remains, of the user. The user is also
responsible for execution of controls related to the installation of
the machine.
The user must adhere to all local, national and European safety
regulations.
The equipment must be installed on floors with adequate load capacity.
The assembly and disassembly instructions for the oven are reserved for
specialized technicians.
It is always recommended that users contact our assistance service for
technical requests.
If other technicians intervene, it is recommended to make certain of their
skills.
Prior to starting machine assembly or disassembly, the installer must
adhere to safety precautions in compliance with the law, and in particular
must:
A) not operate in adverse conditions;
B) operate in perfect psycho/physical conditions and must check
that the individual accident prevention devices are perfectly
functional;
C) wear accident prevention gloves;
D) wear accident prevention footwear;
E) use tools that are electrically insulated;
F) make sure that the area used for assembly and disassembly is
free of any obstacles.
4.2 OVEN INSTALLATION LOCATION
The following figure illustrates the minimum distances that must be
respected when positioning the machine to facilitate use, cleaning and
maintenance of the oven.
- 65 -