Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
WALL MOUNTING
The unit can stand on the floor or hang
on a wall.
Wall-mounting brackets are provided
with your Ecor-Pro dehumidifier.
Fix the support brackets with at least 6 screws to the
wall, use the appropriate fixings for the weight of the
unit and the type of wall, ensure the screw heads pro-
trude by no more than 3.5mm as this will interfere with
the back of the unit - counter-sunk type screws may be
preferrable.
NOTE: the unit is heavy approximately 50kg.
Wall fixing dimensions are shown in the diagram below.
NOTE: H = Hight from floor level to base of unit
564
MAX - 3.5mm
6
When the support brackets are firmly fixed to the wall, remove the lower unit
fixing screws (B) and partially unscrew the upper fixing screws (A).
Place the unit onto the support brackets as shown in the diagram below
making sure the upper unit fixings (A) fit into the upper support bracket slots.
Re-insert the lower fixings (B) through the lower support bracket holes.
Secure all 4 fixings.
7
GB
A
B
Publicité
Table des Matières
