How It Works - Ecor Pro DH1100 Mode D'emploi

Déshumidicateur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB

HOW IT WORKS

Your Ecor-Pro dehumidifier controls the Relative Humidity by passing the air
through the unit forcing the excess moisture to condensate over a cooled
heat exchanger. This condensate water then flows safely into a fixed drain.
The dried air then passes through a final heat exchanger where it is warmed
before it re-enters the room area at a slightly elevated temperature. The level
of dehumidifying is set with the digital humidistat control.
AIR FILTER
DRY AIR
ACCESS
DOOR
AIR
FILTER
INLET
AIR
SENSOR
MOIST
AIR
4
FAN
HEAT
EXCHANGERS
COMPRESSOR
DRAINAGE
TUBE/OUTLET
POSITIONING
There must be free space of at least 30 cm between any other object and the
front and the top of the unit.
Your Ecor-Pro dehumidifier can be installed in any area with a too high relative
humidity, such as cellar, playing area, shed, archive or swimming pool.
The dehumidifier will begin to protect from the harmful effects of excess mois-
ture as soon as it is plugged in and switched on.
When positioning your Ecor-Pro dehumidifier, ensure that it is placed on a
level surface.
Best results are obtained when windows and doors are closed, thus prevent-
ing the possible influx of more humid, air.
When the unit is placed in a (swimming) pool area, connect to the mains via
a transformer or a breaking switch, conform the local regulations regarding
electrical installations.
When the dehumidifier is in operation, open outside doors and windows only
when necessary.
5
GB

Publicité

Table des Matières
loading

Table des Matières