Description Of Symbols - GMC GSDS800 Mode D'emploi

Introduction
Thank you for purchasing this GMC tool. This manual contains information necessary for safe and effective
operation of this product. This product has unique features and, even if you are familiar with similar products,
it is necessary to read this manual carefully to ensure you fully understand the instructions. Ensure all users of
the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the product or
instructions on its use.
Wear hearing protection
Wear eye protection
GB
Wear breathing protection
Wear head protection
Wear hand protection
Wear protective clothing
Read instruction manual
Caution!
Class II construction (double insulated for additional protection)
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing accessories, cleaning,
carrying out maintenance and when not in use!
Keep bystanders away!
Important safety devices! Ensure correct function, maintain in accordance with instructions and
DO NOT disable!
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Original Instructions
Technical Abbreviations Key
V
~, a.c.
A, mA
n0
n
°
Ø
V
~, a.c.
A, mA
n0
n
°
Ø
Specification
Voltage:
Power:
No load speed:
Chuck:
Impact rate:
Impact energy:
Safety clutch (operating range):
Max drilling capacity:
- Masonry
- Wood
- Steel
Power cord length:
Power cable type:
Ingress protection:
Protection class:
Dimensions (L x W x H):
Weight:
As part of our ongoing product development,
specifications of GMC products may alter
without notice.
Sound and vibration information:
Sound Pressure L
PA:
Sound Power L :
WA
6
Volts
Alternating current
Ampere, milli-Amp
No load speed
Rated speed
Degrees
Diameter
Volts
Alternating current
Ampere, milli-Amp
No load speed
Rated speed
Degrees
Diameter
230-240V~, 50Hz
800W
0-900min
-1
SDS Plus
0-4800bpm
2.8J
46.5-60Nm
Ø24mm
Ø40mm
Ø13mm
2m
VDE
IP20
360 x 90 x 210mm
3.2kg
89.4dB(A)
100.4dB(A)