Water Connection - Milwaukee MXF DR255TV Notice Originale

WATER CONNECTION

Core drilling requires the application of water. Supply an
adequate water fl ow!
An adequate supply of water must fl ow freely and
constantly during the entire cut. This Coring Motor are
equipped with a built-in water passage to allow water to
fl ow down the inside and up around the outside of the bit.
This acts to cool the bit and fl ush cuttings from the hole.
MAINTENANCE
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our Milwaukee service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any
work on the machine.
Please read the instructions carefully before
starting the machine.
Wear gloves!
Wear ear protectors!
Always wear goggles when using the machine.
Wear a protective helmet.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose electric tools, batteries/
rechargeable batteries together with household
waste material.
Electric tools and batteries that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
European Conformity Mark
470 408 - MXFDR255TV.indd 27 470 408 - MXFDR255TV.indd 27
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH 27
04.02.2020 11:53:57 04.02.2020 11:53:57