Fitting The Wheels - asalvo baby RUNNER Instructions D'usage

2

FITTING THE WHEELS

- (2a) Fit the rear axle onto the frame.
NB: The brake levers must be pointing rearwards.
- (2b) Place the rear wheels on the axis.
Put the washer (A) onto the axis.
Secure the wheels with the retainers (B), fit the protective caps over them (C) and
place the wheel caps (D) in the rim.
- (2c) To mount the front wheels, push the wheels into the fittings until they click
into place. To remove the front wheels, press the buttons on the wheel fittings and
pull the wheels out.
1a
1a 1a
2a
2a 2a
1a
3
OPERATING THE BRAKE
- Press the lever down to engage
the brake.
- Press the lever up to disengage
the brake.
2c
2c 2c
2a 4
FASTENING THE HARNESS
- (4a) To close the harness, push
the clips (1) into the leg harness
catch (2).
- (4b) Adjust the strap to a
setting where the baby is held in
4b
4b 4b
the correct position.
CAUTION: Always use the
2c
shoulder harness and lap belt
together.
1b
1b
1b
1a
2b
2b 2b
2a
1b
3
3 3
2c
2b
5
5 5
4b
3
1b
1b 1b
1b
2c
2c 2c
2b
1b
4a
4a 4a
3
2c
6
6 6
5
4a
1a
2a
1b
1a
2c
2c
2a
4b
4a
2c
6
4b
1b
2b
1b
EN
3
2b
5
3
5