La Sommeliere MZ2V135 Manuel D'instructions page 34

MZ3V180 control panel
(Upper control panel)
RUN light: indicator light of compressor working. While the compressor operating, the red
light is on. While it stops operating, the red light is off.
SET button: temperature setting button; Once you press the button, the temperature
increases 1℃ or 1℉. Setting range is between 5℃~20℃ (41℉~68℉).
(Middle and lower control panel)
RUN light: indicator light of compressor working. While the compressor operating, the red
light is on. While it stops operating, the red light is off.
UPPER CHAMBER: display of the actual temperature of the upper chamber.
LOWER CHAMBER: display of the actual temperature of the lower chamber.
°C / °F light: when the ℃ light is on, it indicates Celsius temperature; When the ℉ light is on,
it indicates Fahrenheit temperature. °C / °F button: Celsius and Fahrenheit conversion
button.
Button operation
SET button of the middle chamber: temperature setting button. Once you press the
button, the temperature increases 1℃ (34℉). Setting range is between 5℃~12℃
(41℉~54℉).
SET button of the lower chamber: temperature setting button. Once you press the button,
the temperature increases 1℃ (34℉). Setting range is between 12℃~20℃ (54℉~68℉).
LIGHT: Key to turn on / off the light.
When you press the button once, the permanent illumination automatically is on.
ON/OFF button: power on and off button; Press the button, it starts; press it again, it stops.
Note: The compressor will start to work about 5 minutes after it is power connected or
powered off. The temperature inside the cabinet will fluctuate and influence the refrigerating
effect if the surrounding temperature is too high or too cold.
34