First Use - IKEA FROSTIG Mode D'emploi

Masquer les pouces Voir aussi pour FROSTIG:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Fan Function
The function is activated by pressing the
Function button (several times if necessary)
until the corresponding icon appears .
In this condition the fan works continuosly.
It is possible to deactivate the function at
any time by pressing the Function button
until the icon
goes out of view.
Important! If the function is activated
automatically the fan icon is not shown
(refer to "Daily use").
The activation of the fan function increases
the energy consumption.
Action Freeze Function
To freeze fresh foods, you will need to acti-
vate the Action Freeze function. Press Func-
tion button (several times if necessary) until
the corresponding icon appears.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing Function button (refer
to "Functions Menu").
Excessive temperature alarm
An increase in the temperature in the freez-
er compartment (for example due to a
power failure) is indicated by:

First use

Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accesso-
ries with lukewarm water and some neutral
soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.
• flashing temperature
• freezer compartment flashing (Freezer
compartment indicator / Door open
alarm indicator)
• red illumination of display
• sounding of buzzer
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
• the display illumination remains red.
When you press Function button / Alarm re-
set switch to deactivate the alarm, the high-
est temperature reached in the compart-
ment appears on indicator
seconds.
At this point the flashing stops and the dis-
play illumination changes over from red to
white.
During the alarm, the buzzer can be switch-
ed off by pressing Function button / Alarm
reset switch.
The illumination of the display remains red
until normal storage conditions are re-
stored.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
10
for some

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bcf228/64

Table des Matières