Service; Safety Instructions For Wet Diamond Drills; Operating Personnel Requirements; Safety Instructions For All Work - Baier BDB802 Mode D'emploi

EN
e) Maintain power tools with care. Check
whether moving parts are in proper work-
ing order and do not jam, whether parts are
broken or damaged in such a way that they
impair the function of the power tool. Have
damaged parts repaired before using the
tool.
Many accidents are caused by poorly serviced
and maintained power tools.
f) Keep cutting tools sharp and clean at all
times.
Carefully maintained cutting tools with sharp
cutting edges jam less easily and are easier to
control.
g) Use the power tool, insert tools, etc. in ac-
cordance with this instruction manual. Take
into consideration the working conditions
and the work to be carried out.
Use of power tools for other than the intended
applications can lead to dangerous situations.
h) Keep the handles and gripping surfaces dry,
clean and free from oil and grease.
Slippery handles and gripping surfaces prevent
safe operation and control of the power tool in
unforeseen situations.
2.5

Service

a) Have your power tool repaired by qualified
personnel only and use original spare parts
only.
This will ensure that the safety of the power tool
is maintained.
| 30 |
2.6 Safety instructions for wet dia-
mond drills
2.6.1 Operating personnel require-
ments
•
People below the age of 18 may not use the
machine.
•
The operating personnel must be familiar
with the content of this instruction manual.

2.6.2 Safety instructions for all work

•
Wear hearing protection when hammer drill-
ing / diamond drilling.
Exposure to noise can cause loss of hearing.
•
Use the additional handle(s).
Loss of control can result in injuries.
•
Support the power tool properly before us-
ing.
This power tool produces a large torque. If the
power tool is not properly supported during use,
the use can loose control of it and injuries can
occur.

2.6.3 Workplace safety

•
Secure the work area also behind openings
and cutouts.
Unsecured work areas can endanger you and
other people.
•
Watch out for open and concealed electrici-
ty cables, and water and gas pipes. Use suit-
able detectors to find concealed utility pipes
and cables, or contact the local utility com-
pany for advice.
Contact with electricity cables can cause fires
and an electric shock. Damage to a gas pipe
can cause an explosion. Penetrating a water
pipe causes damage to property or could cause
an electric shock.
•
Do not use the power tool near flammable
materials.
Sparks could ignite these materials.
•
Avoid causing situations where other people
can stumble or trip.
Tripping over cables can cause serious injuries.
•
Secure the workpiece.
A workpiece securely held in clamping devices
or a vice is more safely held than in the hand.
•
Avoid dust accumulation in the workplace.
Dusts can easily ignite.
•
Ensure adequate ventilation in closed
rooms.
Risk due to dust and impaired vision.