FitEngine JHK-15671 Mode D'emploi page 15

e) When operating a power tool
outdoors, only use extension
cables that are also suitable for
outdoor use. Use of an extension
cable that is suitable for outdoor
use reduces the risk of electric
shock.
f) If operating the power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use of
an RCD reduces the risk of electric
shock.
3) Personal Safety
a) Remain alert, pay attention to
what you are doing, and use
common sense when operat-
ing a power tool. Do not use a
power tool while you are tired
or under the infl uence of drugs,
alcohol or medication. A moment
of inattention while operating
power tools may result in serious
personal injury.
b) Wear personal protective
equipment and always wear
safety goggles. Wearing personal
protective equipment such as a
dust mask, non-skid safety shoes,
a hard hat, or hearing protection,
depending on how and where the
power tool is used, will reduce the
risk of personal injury.
c) Avoid accidental start-up.
Ensure that the power tool is
switched off before connecting
it to the power supply and / or
battery, picking it up or carrying
it. Carrying power tools with your
fi nger on the switch or energising
power tools that have the switch
on invites accidents.
d) Remove any adjusting tools
or wrenches before switching
on the power tool. A tool or
wrench left attached to a rotating
part of the power tool may result
in injuries. Avoid adopting an
abnormal posture. Maintain a
secure footing and balance at all
times. This enables better control
of the power tool in unexpected
situations.
e) Wear suitable clothing. Do not
wear loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving parts.
Loose clothing, jewellery or long
hair may become entangled in
moving parts.
f) If dust extraction and collection
equipment can be mounted, it
should be connected and used
properly. Use of dust extraction
can reduce dust-related hazards.
g) Do not have a false sense of
security and do not ignore the
safety rules for power tools
even if you are familiar with the
power tool after using it many
times. Careless actions can result
in serious injuries in fractions of a
second.
4) Power Tool Use and Care
a) Do not overload the power tool.
Only ever use the correct power
tool for your application. With
the appropriate power tool, you will
work better and more safely in the
specifi ed power range.
b) Do not use a power tool whose
switch is defective. Any power
tool that cannot be controlled with
the switch is dangerous and must
be repaired.
EN
15