Storage; Cleaning And Care; Disposal; Contact - Gazzini 10040695 Mode D'emploi

4
5
Then place the plastic mount for the ball head (3) on the head of the clamping sleeve screw (1)
and screw the mirror screw connection (4) onto the threaded fl ange (2) with an open-end wrench
(size 19).
CAUTION!
Risk of accident!
• Make sure that the throttle twistgrip on the motorcycle is not impeded by the
mirror base or the fl ange. There should be 2 mm of free space between the
throttle twistgrip and the mirror base. The throttle twistgrip must turn easily
and spring back by itself when released.
Now sit on your motorcycle and adjust the mirror until you have an optimal view of following traffi c.
Check again that the throttle twistgrip is not trapped on the right-hand side. Make sure that the
mirror does not hit against any part of the bike when the steering is at full lock. Then tighten the grub
screw (5) in the mirror screw connection with a hexagon socket head (size 2).

5 | Storage

Until it is installed, the gazzini Mirror should be kept in its original packaging and stored in a place
that is protected against weather and moisture.

6 | Cleaning and care

Use warm soapy water or motorcycle cleaner and a soft cloth to clean the gazzini Mirror. Do not
under any circumstances use cleaners which may corrode aluminium. Finally, apply motorcycle wax
to seal the surface of the mirror and protect it against the weather. Take care not to get any wax on
the mirror lens.

7 | Disposal

Dispose of packaging material and the product itself in accordance with applicable local
regulations.

8 | Contact

If you have any questions about the product and/or these instructions, before using the product for
the fi rst time, please contact our Technical Centre by e-mail at: service@louis.eu. We will help you as
quickly as possible. This is the best way to ensure that the product is used correctly.
Made in Taiwan
12
3 1 2
Traduction du mode d'emploi original
Table des matières
1 | Équipement fourni
2 | Généralités
2.1 | Lire et conserver le présent mode d'emploi
2.2 | Légende
3 | Sécurité
3.1 | Utilisation conforme
3.2 | Consignes de sécurité
4 | Montage
4.1 | Préparation
4.2 | Montage
5 | Stockage
6 | Nettoyage et entretien
7 | Élimination
8 | Contact
14
14
14
15
15
15
15
16
16
16
17
17
17
17
13