What's Included - Gazzini 10040695 Mode D'emploi

Translation of original instructions for use
Contents
1

| What's included

2 | General information
2.1 | Reading and keeping the instructions for use
2.2 | Explanation of symbols
3 | Safety
3.1 | Intended use
3.2 | Safety instructions
4 | Installation
4.1 | Preparation
4.2 | Installation
5 | Storage
6 | Cleaning and care
7 | Disposal
8 | Contact
8
BAR-END MIRROR
1 | What's included
Art. No. 10040695
10040696
9
9
9
10
10
10
10
11
11
11 Angular mirror housing,
1a
including stem
Round mirror housing,
1b
12
including stem
12
2 | General information
12
2.1 | Reading and keeping the instructions for use
12
These instructions for use apply exclusively to the aforementioned gazzini Bar-End Mirrors (for short:
mirrors). They contain important information on installation, safety and the warranty. Read these
instructions carefully, in particular the safety instructions, before using the mirror. Failure to follow
the instructions can result in damage to the mirror itself or to your motorcycle, make it less safe
to ride on the road, and possibly cause consequential damage. Keep these instructions for future
reference. If you pass the mirror on to a third party, you must also hand over these instructions.
The instructions for use are based on the standards and regulations applicable in the European
Union and refl ect current state-of-the-art technology. If abroad, you should also observe any
country-specifi c guidelines and laws.
, 10039781
(left, angular, not shown) (left, round, not shown)
, 10039782
(right, angular) (right, round)
1a
1b
5
3
2 4 6
Grub screw ISO 4027
2 5
M3x6 A2
6
3 Mirror screw connection
7
4 Ball head mount
7
Clamping sleeve screw
Threaded flange
Clamping sleeve set
9