Philips Satinelle Ice Premium HP6513 Mode D'emploi page 15

Problem
The appliance
does not
work.
Skin irritation
occurs.
The leg skin
cooler is not
cold enough.
Possible cause
The socket to
which the
appliance is
connected is
not live.
The appliance is
not switched on.
You did not
attach the
epilating
head correctly.
You used the
epilator for the
first time or
after a long
period of disuse.
You have
applied too
much pressure
to the appliance
You did not
freeze the leg
skin cooler long
enough.
Solution
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may need
to switch on the light to activate
the socket.
Switch on the appliance.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
('click').
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter 'Using
the appliance'. Also make sure you
keep the epilating head clean.
Do not use any pressure when you
move the appliance over skin
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. When the colour of
the fluid has changed from white
to completely blue, the skin cooler
is ready for use.
EnglisH
15