Philips Satinelle Ice Premium HP6513 Mode D'emploi page 12

EnglisH
1
Make sure the outside of the skin cooler is completely dry before
you freeze it again.
cleaning the epilating head
Clean the epilating head after every use.
1 Make sure the appliance is switched off and disconnected from the
mains.
 Remove the epilating head (Fig. 12).
Press the release button (1) and pull the epilating head off the appliance
(2).
 Remove the massaging element (Fig. 13).
 Clean all accessible parts, including the bottom of the epilating head
and the epilating discs, with the brush (Fig. 14).
5 You can also rinse the epilating head (not the appliance!) under the
tap to clean it more thoroughly (Fig. 15).
Never try to detach the epilating discs from the epilating head.
6 Reattach the massaging element to the epilating head. Then place
the epilating head on the appliance and press it until it snaps home
('click') (Fig. 16).
The epilating head only fits onto the appliance in one way.
storage
1 Store the appliance and the accessories in the pouch.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 17).