Charger Features - Team Orion Advantage One 405 Mode D'emploi

Thank you for choosing this Team Orion Advantage One
charger. This charger features the latest developments in
battery charging technology. It is compatible with the most
popular battery types and can use either AC or DC power
sources. Please read these instructions carefully before
using the charger.
SAFETY RECOMMDENDATIONS
 Chargers and batteries used in RC cars are high power
products, misuse or mishandling could result in personal
injury or damage to property.
 LiPo/LiFe and NiCd/NiMH batteries require different
charging methods, make sure that you properly iden-
tify the type of battery you are charging and setup the
charger accordingly.
 Setup the charge parameters according to the battery
manufacturer specifications.
 Make sure you are using a stable power source.
 Use the charger in a well ventilated area, away from
electrically conductive or flammable materials.
 Do not let children use the charger without the super-
vision of an adult.
 Never leave the charger without supervision while it is
powered on.
 This charger is designed for indoor use only. Do not
expose to heat, direct sunlight, water or humidity.
 Do not block the charger's ventilation openings.
www.teamorion.com
 Always inspect the charger, batteries and connections
before using the charger; do not charge damaged
batteries or bloated batteries.
 Do not connect AC and DC power simultaneously.
 Do not attempt to recharge batteries which are not
compatible with this charger.
 Let the battery cool down before recharging it.
 The charger and batteries can become hot during use.
Take great care before handling them.
 If the battery and/or charger have suspicious reactions
during the charge or discharge, such as overheating,
venting or leaking, immediately disconnect the battery
and charger and store them in a safe location, away
from people or electrically conductive and/or flammable
materials.

CHARGER FEATURES

 Microprocessor controlled
 Automatic charge cut-off
 Integrated power supply
 LED charge current display
 Works with AC or DC power sources
 Up to 4A charge current
 Integrated balancer w/JST-XH balance ports
 Charges NiCd/NiMH batteries up to 8 cells
 Charges LiPo batteries with 2 to 4 cells
English - 3