Electric Travel Kettle - SEVERIN WK 3647 Mode D'emploi

GB

Electric travel kettle

Dear Customer,
Before using the appliance, read the
following instructions carefully and keep
this manual for future reference. The
appliance must only be used by persons
familiar with these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
The appliance is equipped with a
voltage selector which can be set to
different supply voltages. The switch
must be set to the mains voltage in
operation where the kettle is being
used!
This product complies with all binding CE
labelling directives.
Familiarisation
1. Water container lid
2. Lid opener
3. Handle
4. On/off switch with indicator light
5. Power cord with plug
6. Spoons
7. Cups
8. Voltage selector switch & RESET
button (on base)
9. Water container with water level
indicator
10. Pouring spout with sieve
10
Important safety instructions
∙ In order to avoid hazards,
repairs to this electrical
appliance or its power
cord must be carried out
by our customer service.
If repairs are needed,
please send the appliance
to our customer service
department (see appendix).
∙ Before cleaning the
appliance, ensure it is
disconnected from the
power supply and has
cooled down completely.
∙ To avoid any risk of electric
shock, do not clean the
appliance with liquids or
immerse it in a liquid.
∙ Descale the appliance
regularly. With heavily
calcified appliances, there
is a risk of water splashing
out of the spout.
∙ If necessary, use a damp
cloth to clean the water