Voltor TC 24 Manuel D'instructions page 32

We recommend that you use security
gloves from here on to avoid possible cuts.
Opening knob
Blade
Blade
4. Block the blade holder by using a screwdriver.
5. Loosen the blades.
Note: Blades have two cutting edges. You can turn
the blades around 180 and use the new edge. If this
edge is also blunt, we recommend that you change
the blades.
Blades can be filed but this operation can only be
carried out by a professional with experience because
if the blades are not left in equilibrium, the shredder
will vibrate strongly and therefore the machine will be
dangerous for the end user.
6. Turn the blades or substitute.
7. Tighten the blades with the disc blocked (tightening
par 12Nm).
8. Close the cover.
9. Tighten the opening knob.
32/95