Lengthening The Line - Weed Eater WE20VT Manuel D'instructions

EDGING FUNCTION
The string trimmer is equipped with an
edging feature for use on multiple surfaces.
This includes sidewalks, walkways, patios,
and driveways. It is great for clearing over-
grown grass from manicured surfaces.
• Pull up Edging Coupler and turn handle
end counter clockwise.
• Release Edging Coupler when handle has
been rotated 180°.
• Flip the edging guide down until it locks
into place.
OPERATION
Edging Coupler
ADJUST THE CUTTING PATH
The cutting path can be adjusted from 10"-
12" (25.5-30.5 cm). Philips Head Screwdriver
(Not Supplied) is required.
Loosen the screw and turn the cutter 180°
then tighten the screw.
12''
WARNING:
• Do not squeeze the trigger while the string
trimmer/edger is inverted.
• Do not carry the string trimmer/edger with
your finger on the trigger switch. Avoid
unintentional starting.

LENGTHENING THE LINE

While the string trimmer is operating, the
cutting line gets worn down and becomes
shorter. This trimmer is equipped with
Automatic Line Advancement, which
automatically feeds additional line to the
correct length as it wears down. If the line
does not automatically advance, the trimmer
line may be tangled or empty. To advance
the line, restart the trimmer. Upon starting,
the line will automatically advance.
11
10''
To avoid injury: