Technical Data; Putting The Appliance Into Operation; Decommissioning And Disposal Of The Appliance; Switching The Appliance Off Completely - Kuppersbusch KMI9850.0 Mode D'emploi

Mains cable available in the factory
• The hob has been fi tted with a temperature-resistant
connection cable in the factory.
• Connection to the mains is carried out in accordance
with the circuit diagram, unless the connection cable is
already fi tted with a plug.
• If the mains cable of this appliance is damaged it will
need to be replaced with a special connection cable. In
order to avoid any risks, this must be carried out by the
manufacturer or his Customer Service.
Electrical connections

7.13 Technical Data

Hob dimensions
height/ width/ depth ...mm
Cooking zones
all zones ............cm / kW
Hob ..............................kW
Fan ..............................kW
Plasma .......................kW
* Power when the power boost function is activated

Decommissioning and disposal of the appliance

170 x 898 x 518 (FB)
170 x 900 x 520 (ER)
19x22/ 2,1 (3,7)*
7.4
0.115
0.01

7.14 Putting the appliance into operation

Once the hob has been installed and the power supply has
been provided (mains connected) an automatic test of the
controls will be carried out and information for Customer
Service will be indicated.
Important: No items may be on the displays when the
appliance is being connected!
Briefl y wipe over the surface of the hob with a sponge and
soapy water and then dry with a clean cloth.
8 Decommissioning and disposal of the ap-
pliance
8.1 Switching the appliance off completely
The appliance is to be put out of operation when its useful
life has fi nally come to an end.
• Disconnect the safety fuse for the domestic wiring sys-
tem in order to prevent a risk of electric shocks.
• Ensure the environmentally friendly disposal of the hob
once it has been removed.

8.2 Disposing of the packaging

Please ensure the environmentally-friendly disposal of the
packaging that came with your appliance. Recycling the
packaging material saves on resources and cuts down on
waste.

8.3 Disposing of old appliances

The symbol on the product or on its packaging
indicates that this product may not be treated
as household waste. Instead it must be handed
over to the applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring that this product is disposed of
correctly you will help to protect the environment and hu-
man health, which could otherwise be harmed through the
inappropriate disposal of this product. For more detailed in-
formation about recycling this product, please contact your
local city offi ce, your household waste disposal service or
the shop where you purchased the product.
GB
45