4. Retirez le brûleur avant (une vis et une rondelle le maintiennent en place).
5. Suivez les instructions ci-dessous pour remplacer les orifices.
Orifice du brûleur avant
a
Slide the air shutters to provide access to the orifices.
9/16" Wrench
d
Screw the LP orifice until orifice
protrudes 15/16" (23.8mm)
indicating full insertion (use
wrench to secure manifold when
re-attaching orifice).
© Travis Industries
Index
1/4" Nutdriver
Orifice du brûleur arrière
Use a 9/16" wrench to secure the
b
manifold while removing the orifice
with a 1/2" wrench.
1/2" Wrench
Rear
Orifice
15/16"
23.8mm
1/16/2019 – 1406-FR
c
Apply thread sealant to the LP orifice prior
to installation. Use the chart below to
identify the correct orifices.
Look here for the orifice identification
NG
NG
Front: #45
#31
#49
Rear: #30
LP
Front: #55
Rear: #49
LP
4237 GSR2
51