Lagrange 609010 Notice page 78

START-UP
Put all of the ingredients in the glass bowl without going beyond
*
the last graduation ( ml).
1500
For a homogeneous mixture, put the liquid ingredients in first and
*
then add the solid ingredients.
Put the cover on the glass bowl, and push it in properly to lock
*
it. Don't forget to put the measuring cup in place in the opening
of the cover.
Plug in the unit. The screen will then go on in blue for
*
if the glass bowl is properly connected.
Start the unit by pressing the on/off button.
*
N.B.: It is better to use the thumb because the contact surface
is larger.
Press the touch-sensitive button of your choice:
*
• "Menu" or "Ice Cream" buttons for a predefined program.
• "Time" and "Speed" buttons for an "à la carte" program.
N.B.: To change the time, the speed or the program in the menu,
just press the button successively.
Press the on/off button again to start the chosen program.
*
To add ingredients during the mixing, remove the measuring
*
cap located on the cover and insert the ingredients through the
opening of the cover.
Be careful not to use the unit for too long so that it doesn't
*
overheat. If you have not finished the mixing at the end
of 3
3 seconds
continuing the mixing.
Be careful to cut meat and solid foods into pieces before
*
putting them in the blender. If you must mix large quantities
of foods, do so progressively, in small portions.
Always stop the unit before opening the cover.
*
N.B.: It is possible to stop the unit at any time by pressing the
on/off button.
USE OF THE CONTROL PANEL
ICE CREAM BUTTON
Duration of the cycle: adjustable (
Speed
To make crushed ice, put ice cubes in the glass bowl and put the
cover back on. Don't add water.
At the end of the cycle, the unit stops automatically.
SPEED BUTTON
to
1 10
78 78
minutes, turn off the unit and let it cool down before
20
10
- - - - - seconds)
40 60 80 100 120