Make An Internal Call - AEG Voxtel D135 twin Guide De Démarrage Rapide

Note:
If there are no numbers in the redial list, the display shows "EMPTY ".
8.8 Find the handset
You can locate the handset by pressing the find key
registered to the base will produce the paging tone and show "PAGING"
on the display for 60 seconds.
You can stop the paging by pressing
again.
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
8.9

Make an internal call

8.9.1 Internal call to other handset
• In idle mode, press
will display, along with a "9".
• Enter the number of the handset that you want to call, or enter 9 to call
all handsets.
• The called handset rings and
establish the intercom call.
Note:
If only one other handset is registered to the base station, pressing
will call the other handset immediately.
Note:
If there is an external call while you are on an intercom call, you'll hear
warning beeps, and you have to end the intercom call, before you can
answer the external call.
8.9.2 Transfer an external call to another handset
During an external call:
• Press and
OK
• Press to show all the other registered handset numbers, plus 9.
Enter the number for the handset you want to transfer the call to.
• The external call is put on hold automatically and the called handset
rings.
• Press on the called handset to establish an internal call.
and all the other registered handset numbers
/ to select "INTERCOM".
on any handset or
must be pressed on that handset to
11
. All the handsets
on the base